Why is my laundry load still wet at the end of the Samsung WA85J675 Washer cycle?
If your laundry load is still wet after a cycle in your Samsung Washer, try using the High or Extra High spin speed, if available on your model. Use high-efficiency (HE) detergent to reduce oversudsing. Be aware that very small loads (one or two items) can become unbalanced and not spin completely.
Why does detergent remain in the automatic dispenser of my Samsung WA85J675 Washer after a cycle?
If detergent remains in the automatic dispenser of your Samsung Washer after a cycle, ensure the washing machine is running with sufficient water pressure. Check that the detergent drawer is properly inserted. Try removing and cleaning the detergent drawer before trying again.
Why does my Samsung WA85J675 Washer spinning not work?
If the spinning function isn't working on your Samsung Washer, make sure the laundry is spread out evenly inside the drum. Check that the washing machine is on a flat, stable surface. Redistribute the load, especially if you're washing only one item of clothing, as this can cause imbalance and an 'Ub' error message.
What to do if detergent remains in the dispenser after a Samsung Washer cycle?
If detergent remains in the automatic dispenser of your Samsung Washer after a cycle, make sure the washing machine is running with sufficient water pressure. Ensure the detergent drawer is properly inserted. You can also remove and clean the detergent drawer before trying again.
Why does my Samsung Washer vibrate excessively or make noise?
Excessive vibration or noise in your Samsung Washer can occur if the washing machine isn't set on a level floor; adjust the leveling feet. Also, ensure the washer isn't touching any other object and that the laundry load is balanced and spread evenly inside. Remove any objects like coins from the washing machine after washing is complete, as these can cause noise. Note that humming during operation is normal.
What to do if my Samsung WA85J675 Washer fills with the wrong temperature water?
If your Samsung Washer fills with the incorrect water temperature, fully open both water taps and ensure the temperature selection is correct. Verify that the hoses are connected to the correct water taps and flush the water lines. Disconnect the hoses and clean the screens, as they may be clogged. Note that the water temperature may change during filling as the automatic temperature control feature checks the incoming water temperature. Also, you may notice just hot or cold water going through the dispenser when cold or warm temperatures are selected; this is normal for the automatic temperature control feature.
General| Capacity | 8.5 kg |
|---|---|
| Tempered Glass Window | Yes |
| Child Lock | Yes |
| Delay End | Yes |
| Fuzzy Logic Control | Yes |
| Digital Display | Yes |
| Digital Inverter Motor | Yes |
| Drum type | Diamond |
To Next Page
