Communication
38
To switch between the two calls, select • Swap.
To end the call on hold, select
• Swap
→
End call.
To make a multiparty call (conference call), make or
•
answer a second call and select Join when connected
to the second party. Repeat to add more parties. You
must subscribe to the multiparty call service to use this
feature.
To connect the current party to the party placed on hold,
•
select
→
Transfer. You will be disconnected.
Using options during a video call
›
You can use the following options while a video call is in
progress:
To activate the speakerphone, select
• Speaker.
To turn o the microphone so that the other party
•
cannot hear you, select Mute.
To listen to talk to the other party via the headset, select
•
→
Switch to headset.
To activate the speakerphone feature, select
• Speaker.
In noisy environments, you may have diculty
hearing some calls while using the speakerphone
feature. For better audio performance, use the
normal device mode.
To activate the camera lens to switch to a video call,
•
select
→
Switch to video call.
To turn o the microphone so that the other party
•
cannot hear you, select Mute.
To listen and talk to the other party via the headset,
•
select Headset.
To dial a second call, place the rst call on hold and then
•
dial a new number.
To answer a second call, select
• Accept when a call
waiting tone sounds. The rst call is automatically placed
on hold. You must subscribe to the call waiting service to
use this feature.
To Next Page
Loading...
