Samsung Wave GT-S8500 - Connectivity; Connect as a mass storage device

Connectivity
98
If you want to transfer les from or to a memory card,
1
insert a memory card into the device.
In Menu mode, select
2
Settings
→
Connectivity
→
USB
→
Mass storage
→
Set.
Press [
3
] to return to Idle mode.
Using an optional PC data cable, connect the
4
multifunction jack on your device to a PC.
When connected, a pop-up window will appear on
the PC.
Open the folder to view les.
5
Copy les from the PC to the memory card.
6
To disconnect the device from the PC, click the
USB device icon on the Windows task bar and
click the option to safely remove the mass storage
device. Then remove the PC data cable from the PC.
Otherwise, you may lose data stored on the memory
card or damage the memory card.
Using an optional PC data cable, connect the
3
multifunction jack on your device to a PC with
Windows Media Player installed.
When connected, a pop-up window will appear on
the PC.
Open Windows Media Player to synchronise music
4
les.
Edit or enter your device’s name in the pop-up window
5
(if necessary).
Select and drag the music les you want to the sync
6
list.
Start synchronisation.
7
›
Connect as a mass storage device
You can connect your device to a PC as a removable disk
and access the le directory. If you insert a memory card
in the device, you can also access the le directory of the
memory card by using the device as a memory card reader.