›
Connect to a WLAN using a Wi-Fi Protected
Setup (WPS)
In Menu mode, select
1
Settings
→
Wi-Fi.
Select
2
WPS button depending on the AP device type.
Press a WPS button on the AP device within 2 minutes.
3
Or, enter a PIN on the AP device and select Start within
2 minutes.
›
Connect to a WLAN device directly
Learn to use the WLAN Direct feature to connect two devices
via a WLAN without requiring an access point.
Connect your device to another device
In Menu mode, select
1
Settings
→
Wi-Fi
→
Wi-Fi Direct.
Select
2
Continue (if necessary).
To allow other devices to locate your device, select
3
My
phone’s visibility
→
Always on.
Drag the slider next to
4
Activation.
The device will automatically search for available devices.
Select a device.
5
When the owner of the other device accepts the
connection, pairing is complete.
To deactivate the Wi-Fi Direct feature, drag the slider next
6
to Activation.
Send data via a WLAN
Select a file or item, such as a memo, media file, or web
1
address, from an appropriate application or My files.
To Next Page
Loading...
