Samsung WB500 - Inserting the battery; Inserting the memory card

015
Insert the battery as shown.
– If the camera does not turn on
after you have inserted battery,
please check whether the battery
is inserted with the correct polarity
(+/-).
– When the battery chamber cover
is opened, do not force it. This
may cause damage to the battery
chamber cover.

There are 4 indicators for battery condition that are displayed on the
LCD monitor.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Battery empty.
Recharge or
use spare
battery.
Inserting the battery Inserting the memory card
Insert the memory card as shown.
- Turn off the camera’s power
before inserting the memory card.
-
Have the front label of the
memory card facing toward the
front of the camera (Lens) and the
card pins toward the back of the
camera (LCD monitor).
- Do not insert the memory card the
wrong way round.
Doing so may damage the memory card slot.