), see item 5 below to select the right specifications that match your product.
1. Digital graphic display
Displays the remaining wash cycle time,all of washing information and error messages.
2. Prewash selection button
Press the button to select prewash.
3. Temperature selection button
Press the button repeatedly to cycle through the available water temperature options
(cold water( ), 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
4. Rinse selection button
Press the rinse button to add rinse cycles. Maximum number of rinse cycles is five.
5. Spin selection button
Press the button repeatedly to cycle through the available spin speed options.
WD-J1255/WD-B1255
,
, 400, 800, 1000, 1200 rpm
: no spin
: Rinse Hold
No spin
The laundry remains in the drum without being spun after the final drain
Rinse Hold
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, either “Drain” or the “Spin” program must be run.
6. Delay Start selection button
Press the button repeatedly to cycle through the available delayed start options (from 3 hour to 24
hours in one hour increments).
Displayed hours means the time of finished washing-cycle.
7. Dry selection button
Press the button repeatedly to cycle through the available dry selections.
(210min. 150min. 90min. 60min.)
Drying course can last up to 210min. When selecting drying only, drying course will start after
spinning . (The spinning time is about 15~17 min.)
Washing a Load of Laundry
A
To Next Page
Loading...
