5-7
5. ASSEMBLY AND DISASSEMBLY
Part Name Descriptive Picture How To Do
Door S/W
1. Open the Door.
2. Remove the Spring Diaphragm and separate the
Diaphragm from the Frame Front.
- Insert the at head screwdriver and pry up the
spring to remove the Spring Diaphragm.
- The Diaphragm could get damaged when taking it
out. So, unseat it in one direction slowly.
3. Remove the screws holding the Door S/W.
4. Take out the Door S/W.
5. Disconnect the wire connector. (Press the hook to
unlock the tab and plug it out.)
Heater
1. Remove the Frame-Front.
2. Disconnect the Connector Housing.
3. Remove the nut holding the Heater and separate
the Heater.
To Next Page
Loading...
