Rubber Feet Leaving Marks on Floor
• Use a pencil eraser to remove mark.
• Walk washer into location, do not drag.
Additive Cups Full of Water
• Small amount of water in bottom of additive cups is normal.
• Remove and wash Dispenser Tray, removable Cup, and Rinse Cap.
• Level washer.
Buttons do not Respond
• Option and Function buttons respond differently according to each cycle.
• Child Lock feature has been selected. To disable feature press and hold Temp and Spin
simultaneously until a beep is heard.
• When display shows “End”, only the Power button will function. Press Power and make new cycle
selections.
6-1. TROUBLE DIAGNOSIS
To Next Page
Loading...
