Part Name Descriptive Picture How To Do
Console
1. Unplug the unit.
2. Remove Top Cover.
3. Remove Dispenser Drawer.
4. Remove screws(3ea) on the top.
5. Plug out all the connectors.
6. Unscrew(6ea) PCB and separate
it from Console.
Door
1. Unplug the unit.
2. Remove screws(2ea) and takeout Door Assy
from Front Panel.
3. Remove screws along the
perimeter of Glass Retainer.
4. Remove Glass Retainer.
5. Remove Door Glass.
6. Remove Hinge.
7. Remove Outer Window Panel.
Front Panel
1. Unplug the unit.
2. Remove Top Cover, Dispenser, Console and
Door.
4. Snap up the boot at 6 o’clock and pull out
the clamp spring.
5. Pull the boot from the lip formed into the front
opening.
6. Remove screws(2ea) on the bottom.
7. Remove screws(4ea) on the top.
8. Plug out the connectors to Door Lock.
9. Lift out Front Panel.
Boot
1. Unplug the unit.
2. Knock the unit down to Front Panel
(included).
3. Unscrew the boot clamp at 12
o’clock.
4. Pull out the boot.
5-2. DISASSEMBLY
To Next Page
Loading...
