Quick Test Mode:
1. All LED’s light up and it sends out Beep Sound when it
enters into the Quick Test Mode. (Including 7-Segment)
2. Displays software version for a sec and Clear EEprom. (Ex. If
S/W Version is 49, 7-Segment will display E149)
3. When the version is displayed, turn the Jog-Dial so that
the version disappears. Press the following keys to test the
various components.
- Temp Key : Water Valve Test
- Spin Key : Door Lock/Unlock Test
- Soil Key : Water/Steam Heater Test(Steam Models)
Water Test(Non-Steam Models)
- Signal Key : Drain Pump Test
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
WARNING
Quick Test Mode
All LEDs On for 1 sec
(include 7-Segment)
S/W version display
(7-Segment)
Turn the Jog-Dial
(S/W Version Disappeared)
All Devices Test using keys
Temp Key Soil Key Signal KeySpin Key
To Next Page
Loading...
