Samsung WF361BVBEWR/A1 - Pure Cycle Self-Cleaning

cleaning and maintaining your washer _29
PURE CYCLE
TM
Pure Cycle is a self-cleaning cycle that removes any mold from inside the washing machine.
1. Press the Power button.
2. Press the Pure Cycle™ button.
Once you have pressed the Pure Cycle button,
the only function you can set is the Delay Start
function.
For WF365*,WF364* models
Select the Pure Cycle™ cycle by turning the
Cycle Selector.
3. Press the Start/Pause button. The Pure Cycle
cycle will start.
The Pure Cycle Auto Alarm Function
• Ifthe“Pure Cycle” button is lit after a wash, it
indicates that tub (drum) cleaning is required.
In this case, remove the laundry from the
washing machine, turn the power on, and
clean the drum by running Pure Cycle.
• IfyoudonotrunPureCycle,the“Pure
Cycle” indicator turns off. However, the
“Pure Cycle” indicator will light again after
two washes. Not running Pure Cycle at
this point will not cause a problem with the
washing machine.
• Althoughgenerally,thePureCycleAutoAlarm
appears once a month or so, the frequency
may differ depending on the number of times
the washing machine is used
03 cleaning and maintaining
WF361_363_365-02832J-07_EN.indd 29 2014-2-22 15:58:24