What to do if my Samsung WF361BVBEWR/A2 will not start?
If your Samsung Washer isn't starting, there are several things to check: * Ensure the door is firmly closed. * Verify the washer is plugged in. * Confirm the water source faucets are open. * Press the Start/Pause Button. * Deactivate the Child Lock if it's on. * Check the fuse or reset the circuit breaker.
What to do if my Samsung WF361BVBEWR/A2 stops mid-cycle?
If your Samsung Washer stops during a cycle, consider the following: * Ensure the power cord is plugged into a working electrical outlet. * Check the fuse or reset the circuit breaker. * Close the door and press the Start/Pause Button. * The cycle might be paused or in a soak period; wait to see if it resumes. * Inspect the inlet hose screens at the faucets for obstructions and clean them if necessary.
Why does my Samsung Washer have no water or not enough water?
If your Samsung Washer isn't filling with enough water, try these steps: * Fully turn on both faucets. * Ensure the door is tightly closed. * Straighten any kinks in the water inlet hoses. * Disconnect the hoses and clean the filter screens, as they may be plugged. * Open and close the door, then press the Start/Pause Button.
How to reduce vibration and noise in my Samsung Washer?
To reduce vibration and noise in your Samsung Washer: * Ensure the washer is on a level surface. * Remove any shipping bolts that may still be attached. * Make sure the washer isn't touching any other objects. * Balance the laundry load evenly.
What to do if detergent remains in the dispenser of my Samsung Washer?
If detergent remains in the automatic dispenser after the wash cycle, ensure the washer is running with sufficient water pressure. Also, when using granular detergent, make sure the Detergent Selector dial is in the upper position.
General information on installation, use, and care of the appliance.
Explains icons and signs used in the manual for safety.
Precautions to reduce risk of fire, electric shock, or injury when using the washer.
Essential warnings for safe installation to prevent electric shock or fire.
Essential warnings for safe operation to prevent fire, shock, burns, or injury.
Inspect washer for shipping damage and ensure all supplied items are received.
Details on electrical supply, grounding, water pressure, and drain facility.
Flow chart and initial steps for installing the washer.
Connect the drain hose and water inlet hoses to the faucets.
Troubleshooting guide for common issues like 'Will not start' or 'Vibrates or is too noisy'.
Solutions for issues like wrong water temperature, door lock problems, and excessive suds.
Explanation of displayed codes (dc, d5, FL, H-, LE, LO, 3E, nd, nF, nFl, PF) and their solutions.
Explanation of codes DE, E2, 6E, LE, 2E, 5Ud and their solutions.
Details the warranty period, coverage, exclusions, and service procedures.
Details the warranty period, coverage, exclusions, and service procedures for Canada.
General| Model | WF361BVBEWR/A2 |
|---|---|
| Type | Front Load Washer |
| Capacity | 3.6 cu. ft. |
| Energy Star Certified | Yes |
| Color | White |
| Steam | Yes |
| VRT Technology | Yes |
| Voltage | 120 V |
| Dimensions | 27" x 38 3/4" x 31 1/4" |
To Next Page