Samsung WF448AAP/XAA - Page 21

Removal and Reassembly _ 19
Part Figure Description
Disassembling the
Pump Motor Part
1. Removethe2Coverpump.
2. SeparatetheClampofthehoseconnectedtothe
PUMPandthenpulltheDRAIN-HOSE.
3. SeparatetheClampofthehoseconnectedtothe
PUMPandthenpulltheHOSE-AIR.
4. SeparatetheClampofthehoseconnectedtothe
PUMPandthenpulltheHOSE-DRAIN.
5. SeparatethewireconnectedtothePUMP.
Removing the
Remaining Water
• Ifthewashingmachineworks,drainthewater
inthewashtubbyselectingtheSpincourse.
Ifthewashingmachinedoesnotwork,remove
thelaundryfromthewashtubandscoopthe
remainingwateroutofthetubusingacup.