Samsung WF806U4SA series - Connecting Hoses and Powering Up

Disassembly and Reassembly _ 15
Part Figure Description
Frame Front
1. Usingthelongnosepliers,pickuponeof
theringsontheWire-Diaphragm,which
connectsthesprintsandthewireends.
ThenseparatetheWire-Diaphragmfrom
theFront-FrameandDisconnectthe
Diaphragm.
2. Removethetwoscrewsholdingthe
FRAME-FRONT.
3. Removethescrewsholdingthebottomof
theFRAME-FRONT.
4. DisconnecttheterminalfortheDOOR-
LOCKswitch.