Samsung WF806U4SA series - Page 18

16 _ Disassembly and Reassembly
Part Figure Description
Cover-Back
Unfastenthe4screwsthatholdthebackcover
inplace.Removethebackcoverbyslidingit
down.
(Whenassembling,slidethebackcoverup.)
Belt
2
1
1. RemovetheCoverback.
2. Separatethebeltandthenassemblyit.
3. Checkifthebeltpositionisatthecenterof
thePulley.
 Assemblingthebelt
PlacethebeltaroundtheMotor-Pulley
(①)andthenoverthePulley(②).
UNIVERSAL MOTOR
1. SeparatetheWireHousingfromthemotor.
2. Removetheboltsholdingthemotoratthe
backofthewashingmachine.
3. Separatethemotor.
Caution
WheninstallingtheBeltaroundtheMotor
Pulley,thebottomofthebeltmustbe
locatedonthesecondtoothofthemotor
pulley.