Disassembly and Reassembly _ 21
Part Figure Description
Drain pump
6. PushthePUMPinwardandthenremove
theHOSE(3EA).
7. Disconnectthewire(4EA).
8. PushtheTUBinwardslightlytoremovethe
PUMP
Pumpwireharnessisconnectedto
mainwireharness.
4 CheckPointsforTroubleshooting
1. SeparatetheDrainFilterandcheckifanyaliensubstancesareinsidethepump(e.g.coins,buttons..,etc.)
→Removetheseiffound.
2. Checkifthewiredrivingthepumphascomeloose→Taketherelevantcountermeasureifnecessary.
3. Whenwaterleaks,checktheassemblystatusoftheClampHose,andCapDrain→Taketherelevant
countermeasure if necessary.
Turntheltercounterclockwisetoremovetheremainingwater.