Samsung WF806U4SA series - Page 24

22 _ Disassembly and Reassembly
Part Figure Description
Door-lock S/W
1. OpentheDoor.
RemovetheWireDiaphragmandremoveit
fromTheFrontFrame.
 Foreasierdisassembly,removethe
springfromthelowerpartofthe
Diaphragmwitha(-)screwdriver.
 SincetheDiaphragmcanbedamaged
whenremovingit.UseaLongnoseplier
andremoveitslowlyinonedirection.
2. Removethe2screws.
3. RemovethescrewholdingtheDoor-Lock
S/W.
RemovetheDoor-LockS/W.
Removetheconnectionwire.
(Onlyremovetheconnectoroncethe
connectorisreleased,thiscanbedoneby
pressingthecatch.)
Leakage Sensor
(OPTION)
1. Disconnecttwowireconnectors.
2. Removethesixscrewsholdingthebottom
oftheFRAME-FRONT.
3. Removethe2screws.