27
Using your washing machine
Child Lock
The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be
changed.
Activating/Deactivating
If you want to activate or deactivate the Child Lock function, hold
down the Temp.
and Rinse buttons at the same time for
3 seconds.
The "Child Lock
" indicator will light up when this feature is activated.
When the Child Lock function is activated, only the Power
button works. The Child Lock function remains on even after
the power is turned on and off or after disconnecting and
reconnecting the power cord.
Sound Off
The Sound Off function can be selected during all cycles. When this function is selected, sound is turned off
for all cycles. Even if the power is turned on and off repeatedly, the setting is retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function, hold
down the Rinse
and Spin buttons at the same time for
3 seconds.
The "Sound Off
" indicator will light up when this feature is activated.
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing a delay of
between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time when the wash will
finish.
1. Add your laundry loosely into the drum without overfilling it.
2. Press the Power
button to turn the power on.
3. Select the appropriate cycle and options for the load.
4. Press the Delay End
button repeatedly until the delay time is set.
5. Press the Start/Pause
button.
The "Delay End
" indicator will light up, and the clock will begin counting down until it reaches the set
time.
6. To cancel the Delay End function, turn the washing machine off and then turn it on again by pressing
the Power
button.
F500E_WF80F5E_EN_20121217.indd 27 2012-12-17 �� 6:08:44
To Next Page
Loading...
