EasyManua.ls Logo

Samsung WF80F5E5U - Doing Laundry; Doing Laundry Using the Cycle Selector

Samsung WF80F5E5U
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Using your washing machine
Doing laundry
Doing laundry using the Cycle Selector
Your new washing machine makes washing laundry easy, using Samsung’s automatic control system "Fuzzy
Control". When you select a wash cycle, the machine will set the correct temperature, washing time, and
washing speed.
1. Turn the water supply on.
2. Press the Power
button to turn the power on.
3. Open the door.
4. Add your laundry loosely into the drum without overfilling it.
5. Close the door.
6. Add detergent, and if necessary, softener or prewash detergent into the appropriate compartments in
the detergent drawer.
The Prewash function is only available when selecting the Cotton , Synthetics , Denim ,
Stain Away
, Dark Garment , Daily Wash , Super Eco Wash and Baby Care cycles. It
is only necessary if your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material: Cotton
,
Synthetics
, Denim , Stain Away , Dark Garment , Daily Wash , Super Eco Wash ,
Outdoor Care
, Baby Care , Wool and Hand Wash . The relevant indicators will light up on the
control panel.
8. At this time, you can control the wash temperature, the number of rinse cycles, the spinning speed, and
the delay time by pressing the appropriate buttons.
9. Press the Start/Pause
button to start the wash. The progress indicator will light up and the
remaining time for the cycle will appear on the display.
Both the total cycle time and the number of rinse cycles in the Cotton cycle may vary
depending on the amount of laundry.
10. After the total cycle has finished, the power will turn off automatically. Open the door and remove the
laundry.
Pausing the wash
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause
button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause
button to restart the wash.
F500E_WF80F5E_EN_20121217.indd 29 2012-12-17 �� 6:08:46

Table of Contents

Related product manuals