14 _ Removal and Reassembly
3-2. STANDARD DISASSEMBLY DRAWINGS
► Thisisastandarddisassemblydiagramandmaydifferfromtheactualproduct.
Usethismaterialasareferencewhendisassemblingandreassemblingtheproduct.
No. Part Description Figure
01 ASSY
COVER
TOP
1.Removethetwoscrews
holding the Top Cover at the
backoftheunit.
2.Removethetop-coverby
lifting it up after pulling it back
about15mm.
3.Then,theWater(Pressure)
Sensor, Noise Filter and
WaterValvecanbereplaced.
Sensor pressure
Watervalve Noiselter