To Next PageTo Next PageWhat to do if the wire driving the pump in my Samsung AEGIS WF8500NHW is loose?
If the wire driving the pump in your Samsung Washer has come loose, check the connection and take the necessary steps to secure it.
How to properly install the heater in a Samsung AEGIS WF8500NHW Washer?
When reassembling the heater in your Samsung Washer, insert it into the correct position of the bracket inside the tub. Ensure you push it inward until the packing part completely enters the tub, sticking firmly. Secure the holding nut with a force of 5Kgf/cm2 to prevent water leaks.
Essential safety instructions for operating the washing machine.
Specific safety instructions for service personnel during maintenance.
Visual representation of electrical connections between components and the control board.
Detailed schematic of the main and sub control systems.
Identifies common error codes, their modes, and potential causes.
Provides step-by-step corrective actions for error codes with photo guidance.
General