What to do if my Samsung WA456DRHDWR/AA Washer failed to lock the lid?
- BBrandy SnyderSep 8, 2025
Close the lid tightly and restart the cycle. If the code reappears, call for service.
What to do if my Samsung WA456DRHDWR/AA Washer failed to lock the lid?
Close the lid tightly and restart the cycle. If the code reappears, call for service.
What to do if my Samsung WA456DRHDWR/AA Washer leaks water?
If your Samsung Washer is leaking water, make sure all hose connections are tight and that the end of the drain hose is correctly inserted and secured to the drainage system. Avoid overloading the washer and use high efficiency detergent to prevent excessive suds.
What to do if my Samsung WA456DRHDWR/AA Washer does not drain and/or spin?
If your Samsung Washer isn't draining or spinning, check the fuse or reset the circuit breaker. Straighten the drain hoses, eliminating any kinks. Close the lid and press the Start/Pause button; the washer won't spin unless the lid is closed. If there is a drain restriction, call for service.
What to do if the lid on my Samsung Washer is locked or will not open?
If the lid on your Samsung Washer is locked or won't open, press the Start/Pause button to stop the washer. It may take a few moments for the lid lock mechanism to disengage.
How do I get rid of excessive suds in my Samsung Washer?
To prevent excessive suds in your Samsung Washer, use high efficiency detergent. Reduce the detergent amount for soft water, small, or lightly soiled loads. Non-HE detergent is NOT recommended.
How do I fix an unbalanced load on my Samsung WA456DRHDWR/AA Washer?
If an unbalanced load prevented your Samsung Washer from spinning, redistribute the load, then press the Start/Pause button.
Why is my Samsung WA456DRHDWR/AA Washer filling with the wrong temperature water?
If your Samsung Washer is filling with the wrong temperature water, fully turn on both faucets and make sure the temperature selection is correct. Ensure the hoses are connected to the correct faucets and flush the water lines. Disconnect the hoses and clean the screens, as the hose filter screens may be plugged. Note that the water temperature may change as the automatic temperature control feature checks incoming water temperature, and you may notice just hot or cold water going through the dispenser when you have selected cold or warm wash temperatures; these are normal functions.
Why does my Samsung WA456DRHDWR/AA keep stopping?
If your Samsung Washer keeps stopping, ensure the power cord is plugged into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the lid and press the Start/Pause button. Note that the washer may make clicking noises to check the lid lock and do a quick drain before filling, or there may be a pause or soak period in the cycle. Check the screens on the inlet hoses at the faucets for obstructions and clean them periodically.
What should I do if my Samsung WA456DRHDWR/AA Washer is not draining?
If your Samsung Washer is not draining, turn the unit off and on again. Select only the Spin Cycle. Press the Start/Pause to drain the water. If it still does not drain, call for service.
Why is my laundry load still too wet after the Samsung Washer cycle?
If your laundry load is too wet at the end of the Samsung Washer cycle, use the High spin speed and high efficiency detergent to reduce over-sudsing. Very small loads (one or two items) may become unbalanced and not spin out completely.
Style | Top-Loading |
---|---|
Color | Neat White |
Washer Capacity | 4.8 cu ft |
Dryer Capactity | - |
Max Spin Speed | 1100 RPM |
Spin Speeds | No Spin) |
Spin Class | C |
Number of Cycles | 11 |
Cycle Selections | Rinse + Spin |
Wash | Delicate |
Options | Tub clean function |
Hours | Extra Rinse |
Noise level | - |
Temperature Selections | Tap Cold) |
Energy Class | - |
Annual Energy Consumption | 185 kWh |
Annual Water Consumption | - |
Water Consumption Per Cycle | - |
Voltage | 120V |
Frequency | - |
Current | 15 A |
Depth | 29 1/4 in |
---|---|
Height | 43 7/8 in |
Width | 27 in |
Net Weight | 122.2 Lbs |
Explains warning and caution symbols and their meanings.
Details safe electrical connections, grounding, and power cord usage.
Warns against unsafe locations like humid or hot areas.
Advises on immediate actions for flooding, gas leaks, and flammable substances.
Warns about wet hands, improper unplugging, and foreign substance entry.
Advises on child supervision, self-repair, and managing water leaks.
Covers general usage, appliance stability, and handling of items.
Details electrical, grounding, and water pressure requirements.
Details how to connect hot and cold water supply hoses correctly.
Advises on HE detergents and using the automatic dispenser for additives.
Solutions for issues with starting, water filling, and noise.
Solves problems with water temperature, drainage, spin, leaks, and excessive suds.
Lists error codes displayed by the washer and their solutions.
Covers additional error codes related to sensors and connections.