Samsung AEGIS WF8500NHW - Troubleshooting

Removal and Reassembly _ 25
Part Figure Description
DRAIN PUMP
6. ReleasetheBANDRING(2EA)toremove
theHOSE(2EA).
7. PushtheTUBinwardsslightlytoremove
thePUMP.
8. Disconnectthewires(2EA).
※ CheckPointsforTroubleshooting
1. SeparatetheDrainFilterandcheckifanyaliensubstancesareinsidethepump(e.g.
coins,buttons..,etc.)→Removetheseiffound.
2. Checkifthewiredrivingthepumpishascomeloose→Taketherelevantcountermeasure
if necessary.
3. Whenwaterleaks,checktheassemblystatusoftheClampHose,andCapDrain→Take
therelevantcountermeasureifnecessary.
Turntheltercounterclockwisetoremovetheremainingwater.
WF-M592NMH-YLP.indb 25 2010-2-22 13:29:52