Samsung AEGIS WF8500NHW - Disassembly Procedures

16 _ Removal and Reassembly
3-2. STANDARD DISASSEMBLY DRAWINGS
► Thisisastandarddisassemblydiagramandmaydifferfromtheactualproduct.
Usethismaterialasareferencewhendisassemblingandreassemblingtheproduct.
Part Figure Description
ASSY COVER TOP
1. RemovethetwoscrewsholdingtheTop
Coveratthebackoftheunit.
2. Removethetop-coverbyliftingitupafter
pullingitbackabout15mm.
3. Then,theWater(Pressure)Sensor,Noise
FilterandWaterValvecanbereplaced.
Watervalve Noiselter
Sensor pressure
WF-M592NMH-YLP.indb 16 2010-2-22 13:29:41