Samsung AEGIS WF8500NHW - Page 16

Removal and Reassembly _ 17
Part Figure Description
MAIN-PCB AND
SUB-PCB PANEL
1. Removethe2screwsholdingthefront
operatingpanel.
2. Removethetwoscrewsatthetopofthe
ASSY-PANEL CONTROL.
3. HoldtheASSY-PANELCONTROLwhile
pullingitupwardsandreleasethehookto
remove it.
4. Disconnecttheterminalsconnectedtothe
PCBbyhand.
5. RemovethefourscrewsholdingthePCB
andreleasethehooksonbothsidesto
removethePCBforrepair/replacement.
WF-M592NMH-YLP.indb 17 2010-2-22 13:29:42