Samsung AEGIS WF8500NHW - Page 17

18 _ Removal and Reassembly
Part Figure Description
FRAME FRONT
1. OpentheDoor.
RemovetheWireDiaphragmandremoveit
fromTheFrontFrame.
 Foreasierdisassembly,removethe
springfromthelowerpartofthe
Diaphragmwitha(-)screwdriver.
 SincetheDiaphragmcanbedamaged
whenremovingit,removeitslowlyin
onedirection.
2. RemovetheASSY-CLAMPDIAPHRAGM.
3. Removethetwoscrewsholdingthe
FRAME-FRONT.
4. Removethethreescrewsholdingthe
bottomoftheFRAME-FRONT.
5. DisconnecttheterminalfortheDOOR-
LOCKswitch.
6. TheDOOR-DIAPHRAGM,HEATER,PUMP,
SHOCK-DAMPERandDOORLOCK
switch.
WF-M592NMH-YLP.indb 18 2010-2-22 13:29:44