Samsung WF856UHSAGD/SA - Page 24

22 _ Removal and Reassembly
No. Part Description Figure
10 COVER-
BACK
1.Removethe4screwsholding
the Back-Cover at the back of
thewashingmachine.
11 BELT 1.Separatethebeltandthen
assemblyit.
2.Checkifthebeltpositionisat
thecenterofthePulley.
Assembling the belt
Place the belt around the
Pulley (
) and then over the
Motor-Pulley ( ).
12 MOTOR 1.SeparatetheWireHousing
fromthemotor.
2.Removethetwoboltsholding
the motor at the back of the
washingmachine.
The 2 screws designated ‘A’
which are inside must be also
removed.
3.Separatethemotor.
WheninstallingtheBelt
around the Motor Pulley, the
bottom of the belt must be
locatedonthesecondoorof
theMotorPulley.
A