Samsung WF856UHSAGD/SA - Page 30

28 _ Removal and Reassembly
No. Part Description Figure
17 HEATER 4.Removethenutholdingthe
heater
5.RemovetheHeaterfromthe
Tub.
Caution
Make sure to insert the Heater
into the correct position of the
bracket inside the Tub when
reassemblingit.Otherwise,
thereisadangerofare.
Make sure to push it inwards until the
packing part comes into the Tub completely
when reassembling it so that the packing
partiscompletelystucktotheTub.
Fastentheholdingnutwithaforceof5Kgf/cm2.
If the nut is not fastened properly, there is a danger of water
leaking.