Samsung WMN-M12E - Page 6

• If
you cannot adjust the horizontal level by using the horizontal adjustment function, check
if
the installation was
done properly.
If
you cannot
use
the
horizontal adjustment function,
the
fixers
on
the
wall
mount's support frame are not
properly fixed. Make sure
to
install them properly.
•
The
horizontal level
that
can
be
adjusted
is
just
1 to 2 degrees.
To
adjust the horizontal level
at
more angles than this
range,
reinstall
the
wall
mount.
-
---~-~-~-~-~-----
---
----~=-=-~-~-~-~-~-
- -
l
t
t
l
• If
the wall mount's fixers are
not
fixed
to
the end
as
shown
in
the
figure,
subtle impacts may move the
TV.
In
this
case,
make sure to install the fixers properly
so
that
they are fixed to the
TV
all
the way
to
the end.
•
To
prevent cable damage when dismounting the
TV
from the wall, disconnect
the
power cable and the optical cable
before removing
the
wall mount.
• When detaching the
TV
from
the
wall,
first
pull
it
forward, and then
be
sure
that
two
people
pull
it
upward
simultaneously.
Do
not apply direct force
on
the display.
-English
6-