EasyManua.ls Logo

Samsung WMN8200SFXEN - User Manual

Samsung WMN8200SFXEN
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
English - 1
Wall Mount Installation Precautions
Use only the provided accessories and parts to install the wall mount.
Do not install on any surface other than a vertical wall.
In order to ensure the product’s performance and prevent malfunctions, do not install it in the following areas:
- Areas with strong vibration and/or impact: Can cause the product to fall and become damaged.
- In the vicinity of a re sprinkler: Heat generated by the product may trigger the sprinkler.
- In the vicinity of a high-voltage cable: Interference from the cable can prevent the TV from displaying images correctly.
- In the vicinity of a heater: Can cause the product to overheat and malfunction.
- Check the stability of the wall.
- Weak walls will need to be reinforced before the TV can be mounted.
Do not hollow out a wall and install the TV inside it.
Connect all the external devices to the TV before installing the wall mount.
If intending to mount on a non-concrete wall, contact a professional installer and verify rst.
Once installed, maintain a distance of at least 28mm between the wall surface and the TV.
Check the model of your TV, the corresponding installation guide on the back, and the types of walls the TV can be mounted on.
[ Check the type of the wall before installing.
Standard Installation Requirements by Wall Type
Can only be mounted on a concrete or interior wall of sufcient thickness. Refer to the diagrams below.
Min. 50mm
Min. 10mm
MDF, PW
Min. 10mm
MDF, PW
Min. 10mm
MDF, PW
MDF, PW
Concrete
MDF, PW
(Exc. drywall
thickness)
Mixed Concrete
Wall (Exc. drywall
thickness)
Art Wall
Art Wall
Min. 30mm
Min. 30mm
Min.
25mm
Min.
25mm
MDF
PW, etc.
With reinforcement
Min.
50mm
NOTE
MDF = Medium Density Fiberboard
PW = Plywood
Cannot be mounted on unreinforced wall or drywall surfaces.
0~24mm
MDF, PW,
Concrete
Without
reinforcement
Cannot install on drywall
Drywall
Art Wall
Safety instructions
These safety instruction are intended to protect you and prevent property damage. Read them carefully and comply with these instructions. Failing to follow
them may result in physical injury.
1.
This product must be installed by a qualied technician assigned by the retailer.
Install by a non-professional may result in physical injury or product damage.
If you want to move or replace the product
after installation, contact the technician as-
signed by the retailer again.
Do not hang from the installed product or
apply force to it.
2. Do not let children play around the product without supervision.
Children may bump their heads or bodies into the corners, resulting in injury.
3.
Do not install the product on a wall that will not support its weight.
The product may fall, resulting in physical injury or product damage.
4.
Do not install the product under abnormal or non-standard site conditions. The product may be severely damaged. In these circumstances, contact a local Sam-
sung service center.
Keep the product away from dust, chemicals, high or low temperatures, humidity, and/or vehicle trafc.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Samsung WMN8200SFXEN and is the answer not in the manual?

Summary

Wall Mount Installation Precautions

Standard Installation Requirements by Wall Type

Specifies wall types and thickness for secure mounting.

Safety Instructions

Crucial safety guidelines to prevent injury and product damage.

Accessories

Installation Guide

Check Wall Status and Flatness

Verify wall type, thickness, and flatness before proceeding.

Check Installation Conditions

Determine if the TV model is Normal or Slim type.

Insert Leveling Screws

Install leveling screws loosely to prevent detachment.

Adjust Height-Adjustment Brackets

Modify height-adjustment brackets for the chosen orientation.

Assemble Length Adjustment Bars

Connect length adjustment bars to wall mount brackets.

Mark Anchor Insertion Points

Position the assembly and mark anchor locations on the wall.

Insert Anchors and Screws

Securely install anchors and screws at marked points.

Drywall Installation with Stud Reinforcements

Specific instructions for mounting on drywall with stud support.

Remove Wall Mount Brackets

Detach screws holding wall mount brackets in place.

Assemble Mounting Pieces to LFD

Attach mounting pieces to the back of the LFD unit.

Mount LFD with Assistance

Two or more people needed to lift and hang the LFD.

Secure LFD and Connect Cables

Lift, secure the LFD bottom, and connect cables.

Secure Bottom Safety Hooks

Engage bottom safety hooks to secure the mounting pieces.

Product Specifications

Samsung WMN8200SFXEN Specifications

General IconGeneral
BrandSamsung
ModelWMN8200SFXEN
CategoryRacks & Stands
LanguageEnglish

Related product manuals