Installing driver over the network
103
2. Using a Network-Connected Machine
1
Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2
Copy Unified Linux Driver package to your system.
3
Open Terminal program and go to the folder that you copied the
package to.
4
Extract the package.
5
Move to uld folder.
6
Execute ” ./install.sh“ command (If you are not logged in as root,
execute the command with “sudo” as “sudo ./install.sh”).
7
Proceed with installation.
8
When installation finished, launch Printing utility (Go to System >
Administration > Printing or execute “system-config-printer“
command in Terminal program).
9
Click Add button.
10
Select AppSocket/HP JetDirect and enter your machine’s IP address.
11
Click Forward button and add it to your system.
To Next Page
Loading...
