Control panel overview
21
1. Introduction
4
(Cancel)
You can stop an operation at any time. You also can do the
following functions.
• Configuration sheet
- Press and hold this button for about 2 seconds until
the green LED blinks slowly, and release.
• Prints event log report / usage counter
- Press and hold this button for about 4 seconds until
the green LED blinks quickly, and release.
• Prints supplies info report
- Press and hold this button for about 6 seconds until
the green LED on, and release.
5
(Power/
Wakeup)
You can turn the power off or wake the machine up from
the sleep mode with this button.
6
(Status LED)
Shows the status of your machine (see "Status LED" on
page 65).
a. CLP-36xW only
b. CLP-36x only
To Next Page
Loading...
