Control panel overview
25
1. Introduction
7 Left/
Right
Arrows
Scrolls through the options available in the selected
menu and increases or decreases values.
8
Numeric keypad
Dials a number or enters alphanumeric characters (see
"Keypad letters and numbers" on page 202).
9 Address
Book
Allows you to store frequently used fax numbers or
search for stored fax numbers (see "Storing email
address" on page 200 or "Setting up the fax address
book" on page 203).
10
Redial/
Pause
Redials the recently sent fax number or received caller
ID in ready mode, or inserts a pause(-) into a fax number
in edit mode (see "Redialing the fax number" on page
227).
11
Stop/
Clear
Stops an operations at any time.
12
Power/
Wakeup
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
13
Start
Starts a job.
14
Power
saver
Goes into sleep mode.
15
On Hook
Dial
When you press this button, you can hear a dial tone.
Then enter a fax number. It is similar to making a call
using speaker phone (see "Receiving manually in Tel
mode" on page 233).
16 OK Confirms the selection on the screen.
17
Back
Sends you back to the upper menu level.
18
Scan
Switches to Scan mode.
19
Status LED
Indicates the status of your machine (see
"Understanding the status LED" on page 94).
20
Eco
Turn into eco mode to reduce toner consumption and
paper usage when pc-printing and copying only (see
"Eco printing" on page 54).
To Next Page
Loading...
