SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 27 / 58
7.2 FUNCTION Group
FUNCTION group consists of setting parameter D-register related with operational function and process.
█ Common Operational Function setting D-Register for both PROG / FIX
D-Reg. Symbol Descriptions
D0108 FUZZY FUZZY Function (0:0FF, 1:ON)
D0112 KEYLOCK KEYLOCK Function (0:0FF, 1:ON)
D0114 LIGHT.OFFTM Backlight ON time
D0123 MEM.FULL Recording mode when internal memory FULL (0:0FF, 1:ON)
D0124 DRAW.CYCLE Sampling time for recording on internal memory
D0125 PV.GRP_RECORD Activating to record on internal memory (0:0FF, 1:ON)
D0129 REC.OP Activating to record on SD memory card (0:0FF, 1:ON)
D0130 REC.CYCLE Sampling time for recording on SD memory card
D0131 BACK.ITEM BACKUP ITEM setting
D0132 BACK.DIR BACKUP DIRECTION setting
D0136 TEMP.AT Carrying out temperature Auto-Tuning (0:0FF, 1:ON)
D0137 HUMI.AT Carrying out humidity Auto-Tuning (0:0FF, 1:ON)
D0147 PV.FONT PV FONT select (0:HEAD, 1:NORM, 2:ART)
D0148 HUMI.DISPLAY Relative Humidity display (0:AUTO, 1:MANUAL)
D0149 BUZ.ONOFF Buzzer sound ( 0: UNUSE, 1: USE )
█ PROGRAM Operation & Function setting D-Register
D-Reg. Symbol Descriptions
D0100 SET_PTNO Pattern Number to run program operation
D0140 WAIT.USE WAIT Function (0:UNUSE, 1:USE )
D0141 WAIT_TZONE Temperature WAIT ZONE setting
D0142 WAIT_HZONE Humidity WAIT ZONE setting
D0143 WAIT_TIME WAIT TIME setting
D0144 WAIT.METHOD Target of WAIT function (0:ALL, 1:SEG )
█ FIX Operation & Function setting D-Register
D-Reg. Symbol Descriptions
D0102 FIX.TEMP_TSP Temperature Set Point on FIX operation
D0103 FIX.HUMI_TSP Humidity Set Point on FIX operation
D0109 TIME.OP TIME OPERATION (0:UNUSE, 1:USE)
D0110 TIME.OP_H HOUR setting for TIME OPERATION
D0111 TIME.OP_M MINUTE setting for TIME OPERATION
To Next Page
Loading...
