SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 30 / 58
7.4 ON/OFF SIGNAL Group
This setting parameter D-register group is used to establish 9 ON/OFF SIGNALs for temperature and 4 ON/OFF
signal for humidity.
█ ON/OFF SIGNAL setting D-Register
D-Reg. Symbol Descriptions
D0301 T1.LSP Low SP for temperature ON/OFF SIGNAL 1 (T1)
D0302 T1.MSP Middle SP for temperature ON/OFF SIGNAL 1 (T1)
D0303 T1.HSP High SP for temperature ON/OFF SIGNAL 1 (T1)
D0304 T1.HDV High zone Deviation for operating Point at High Zone T1
D0305 T1.LDV Low zone Deviation for operating Point at Low Zone T1
… … …
D0385 H4.LSP Low SP for humidity ON/OFF SIGNAL 4 (H4)
D0386 H4.MSP Middle SP for humidity ON/OFF SIGNAL 4 (H4)
D0387 H4.HSP High SP for humidity ON/OFF SIGNAL 4 (H4)
D0388 H4.HDV High zone Deviation for operating Point at High Zone H4
D0389 H4.LDV Low zone Deviation for operating Point at Low Zone H4
To Next Page
Loading...
