SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 31 / 58
7.5 INNER SIGNAL Group
This setting parameter D-register group is used to establish 10 INNER SIGNALs.
█ INNER SIGNAL setting D-Register
D-Reg. Symbol Descriptions
D0401 IS1.TGT Target of INNER SIGNAL 1 (Temp/Humi)
D0402 IS1.TYPE Object Type of Target of INNER SIGNAL 1 (SP/PV/MV)
D0403 IS1.BAND Direction Band of INNER SIGNAL 1 (IN-B/OUT-B)
D0404 IS1.TEMPRH Temperature range HIGH of INNER SIGNAL 1
D0405 IS1.TEMPRL Temperature range LOW of INNER SIGNAL 1
D0406 IS1.TEMPDYT DELAY TIME of Temperature INNER SIGNAL 1
D0407 IS1.HUMIRH Humidity range HIGH of INNER SIGNAL 1
D0408 IS1.HUMIRL Humidity range LOW of INNER SIGNAL 1
D0409 IS1.HUMIDYT DELAY TIME for Humidity INNER SIGNAL 1
.
.
.
.
.
.
.
.
.
D0482 IS10.TGT Target of INNER SIGNAL 10 (Temp/Humi)
D0483 IS10.TYPE Object Type of Target of INNER SIGNAL 10 (SP/PV/MV)
D0484 IS10.BAND Direction Band of INNER SIGNAL 10 (IN-B/OUT-B)
D0485 IS10.TEMPRH Temperature range HIGH of INNER SIGNAL 10
D0486 IS10.TEMPRL Temperature range LOW of INNER SIGNAL 10
D0487 IS10.TEMPDYT DELAY TIME of Temperature INNER SIGNAL 10
D0488 IS10.HUMIRH Humidity range HIGH of INNER SIGNAL 10
D0489 IS10.HUMIRL Humidity range LOW of INNER SIGNAL 10
D0490 IS10.HUMIDYT DELAY TIME for Humidity INNER SIGNAL 10
To Next Page
Loading...
