SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 43 / 58
█ PROGRAM and its REPEAT operation setting D-Register
D-Reg. Symbol Descriptions
D1736 START.CODE START CODE for operation (0:NOW PV, 1:TEMP SP, 2:HUMI SP)
D1737 START.TEMP_SP Temperature START SP (TEMP.SSP)
D1738 START.HUMI_SP Humidity START SP (HUMI.SSP)
D1741 PT.RPT Count number for PATTERN REPEAT (0:Infinitely, 1 ~ 99)
D1742 PT.EMOD PATTERN END MODE (0:RESET, 1:SEG HOLD, 2:LINK RUN )
D1743 LINK.PT LINK PATTERN ( 1 ~ 120 )
D1746 SEG_RPT.S1 SEGMENT REPEAT START-1
D1747 SEG_RPT.E1 SEGMENT REPEAT END-1
D1748 SEG_RPT.C1 SEGMENT REPEAT COUNT-1
D1749 SEG_RPT.S2 SEGMENT REPEAT START-2
D1750 SEG_RPT.E2 SEGMENT REPEAT END-2
D1751 SEG_RPT.C2 SEGMENT REPEAT COUNT-2
D1752 SEG_RPT.S3 SEGMENT REPEAT START-3
D1753 SEG_RPT.E3 SEGMENT REPEAT END-3
D1754 SEG_RPT.C3 SEGMENT REPEAT COUNT-3
D1755 SEG_RPT.S4 SEGMENT REPEAT START-4
D1756 SEG_RPT.E4 SEGMENT REPEAT END-4
D1757 SEG_RPT.C4 SEGMENT REPEAT COUNT-4
To Next Page
Loading...
