SAMWONTECH
1th Edition of TEMP2000_Series IM : Dec. 15. 2008 Page 44 / 63
█ PROGRAM and its REPEAT operation setting D-Register
D-Reg. Symbol Descriptions
D2145 START.CODE START CODE for operation (0:TPV, 1:SPV, 2:SSP)
D2146 START.SP START SSP
D2150 PT.RPT Count number for PATTERN REPEAT (0:Infinitely, 1 ~ 999)
D2151 PT.EMOD PATTERN END MODE (0:RESET, 1:SEG HOLD, 2:LINK RUN )
D2152 LINK.PT LINK PATTERN ( 1 ~ 80 )
D2156 SEG_RPT.S1 SEGMENT REPEAT START-1
D2157 SEG_RPT.E1 SEGMENT REPEAT END-1
D2158 SEG_RPT.C1 SEGMENT REPEAT COUNT-1
D2159 SEG_RPT.S2 SEGMENT REPEAT START-2
D2160 SEG_RPT.E2 SEGMENT REPEAT END-2
D2161 SEG_RPT.C2 SEGMENT REPEAT COUNT-2
D2162 SEG_RPT.S3 SEGMENT REPEAT START-3
D2163 SEG_RPT.E3 SEGMENT REPEAT END-3
D2164 SEG_RPT.C3 SEGMENT REPEAT COUNT-3
D2165 SEG_RPT.S4 SEGMENT REPEAT START-4
D2166 SEG_RPT.E4 SEGMENT REPEAT END-4
D2167 SEG_RPT.C4 SEGMENT REPEAT COUNT-4
To Next Page
Loading...
