Samyung N500 - User Manual

User Guide
1
User Guide
2
SAFETY INSTRUCTIONS
This device’s electronic chat system(ECS) is developed for the
navigational aid only and chart itself does not obtain any approvals;
has not been certified from the government authorities. If operator
needs safe navigation then must use an official chart that has been approved by
government agencies also operator is fully responsible for using this device.
Please read through this manual before the first operation. If you have any
questions, please contact the customer service or your local dealer or distributor
Extensive exposure to heat may result in damage to the chart plotter.
Connection to the power source with reversed polarity will damage the chart
plotter severely. This damage is not covered by the warranty.
Do not disassemble. The chart plotter contains dangerous high voltage circuits
which only experienced technicians must handle
Exposure of the display to UV rays may shorten the life of the liquid crystals used
in you plotter. This limitation is due to the current technology of the LCD display.
Avoid overheating which may cause loss of contrast and, in extreme case, a
darkening of the screen. Problems which occur from over heating are reversible
when temperature decreases.
Screen Cleaning Precautions
Cleaning your chart plotter screen is a very important operation and must be done
carefully. The following is the cleaning procedure.
You use a tissue or lens tissue and a cleaning spray containing Isopropanol (a
normal spray cleaner sold for PC screens. Fold the tissue or lens tissue into a
triangular shape, moisten the tip and use the index finger behind a corner to
move the tissue across the surface, in overlapping side to side strokes. If the
tissue is too wet, a noticeable wet film will be left in its path and you will need to
repeat the process. If too dry, the tissue won’t glide easily, and may damage the
surface.
If you require technical advice or assistance, contact your nearest Samyung ENC
office or visit our website,
www.samyungenc.com.

Summary

Safety Instructions and Precautions

Screen Cleaning Procedures

Guidelines for safely cleaning the chart plotter display screen.

Product Introduction and Overview

General Info and Specifications

Overview of the device's purpose, features, and technical specifications.

Package Contents and Optional Accessories

Details on included items and available add-ons for the unit.

Getting Started with Your Chart Plotter

Unit Mounting and Initial Setup

Instructions for installing the unit and basic setup procedures.

Key Features and Chart Management

Understanding buttons, SD cards, chart selection, and simulate mode.

Navigation Aids and Display Modes

Using data bar, compass, multi-window displays, and MOB feature.

General Operation and Navigation

Power and Display Settings

Procedures for powering the unit and adjusting screen brightness and modes.

Interface Navigation

How to use the page window to access various functions and features.

Chart Navigation Features

Detailed functions for chart display, finding locations, and navigation planning.

Sonar and Fish Finding

Operating the sonar, interpreting displays, and fish finding techniques.

Highway, Gauges, and Data Display

Using Highway, Gauges, and Data Bar for navigation information.

Waypoint and Route Management

Creating, editing, storing, and navigating using waypoints and routes.

Integrated Navigation Systems

Information on Satellites, Tides, AIS, DSC, and NAVTEX features.

Engine Status Monitoring

Displaying engine errors and malfunctions for maintenance.

Advanced Settings and Configuration

System Configuration Settings

Configuring system-wide settings like language, chart selection, and beep volume.

Chart Settings and Display Options

Customizing chart rotation, palettes, data display, and map features.

Sonar Settings and Configuration

Adjusting sonar parameters like frequency, gain, range, and display modes.

GPS Settings and Configuration

Configuring GPS source, speed filters, and NMEA output settings.

Track, Log, and Memory Settings

Track and Log Management

Setting up and managing track recording, plotting intervals, and trip distance.

Memory Settings and Data Saving

Saving, loading, and deleting data like waypoints, routes, and tracks to a user card.

AIS and Alarm Settings

Configuring AIS display filters, alarms, and safety messages.

Other Settings, Installation, and Connections

Other Settings and Calibration

Managing simulate mode, waypoints, GPS, units, comms, calibration, and calendar.

Installation Guide and Connections

Instructions for unit installation, optional accessories, and wiring connections.

System Maintenance and Warranty

GPS Antenna, NMEA, and Sonar Connections

Configuring GPS antenna, NMEA, and connecting sonar transducers.

Setup, Testing, and Maintenance

Performing initial setup, testing, system maintenance, and troubleshooting.

Product Warranty and Contact Information

Product Warranty Information

Details on warranty coverage, exclusions, and service procedures.

Samyung N500 Specifications

General

Brand	Samyung
Model	N500
Category	Fish Finder
Language	English