Samyung NF120 - User Manual

1

Summary

Safety Instructions

1 Introduction

1-2 Specification

Detailed technical specifications of the chart plotter, including dimensions, display, power, and communication interfaces.

2 Getting Started

2-1 Installation

Guidance on installing the chart plotter, including bracket and flush mounting options.

2-1-1 Bracket Mounting

Instructions for mounting the display unit using a bracket, including mounting and removal steps.

2-2 Buttons

Description of the front panel buttons, their functions, and how to use them for navigation and operation.

2-4 Chart Selection

2-8 Multi Window Display

3 General Operation

3-1 Power on and off

Instructions for powering the chart plotter on and off, including the initial startup sequence.

3-4 Chart

3-4-1 Chart Window

Details on the chart window's layout, elements like data bar, compass, scale, and cursor.

3-4-4 NAVIONICS Search

3-4-5 SAMYUNG Map Search

3-4-7 Introduction to navigating

3-4-8 Going to a waypoint or to a point on the chart

Steps to navigate to a specific waypoint or a selected point on the chart.

3-4-9 Following a route

Guidance on creating, starting, skipping, and cancelling routes for multi-point navigation.

3-4-13 Setting Tracks in the chart window

3-4-14 3 D MAP

3-6 Sonar

3-6-1 Display Description

3-6-2 Mode

3-6-3 Single or Dual Frequency Fish finding

3-6-4 Range

3-6-5 Gain

Adjusting gain and threshold values in Manual mode for optimal sonar signal reception and clarity.

3-6-6 Sonar window display

3-6-8 Split zoom and Full Screen zoom

3-6-10 Split 50;200

3-6-11 Split A-Scope

3-9 Waypoints

3-9-1 Creating a new waypoint

Steps to create new waypoints from the chart window or the waypoint list.

3-9-3 Editing an existing waypoint

3-9-4 Deleting a waypoint

3-10 Routes

3-10-1 Managing a route from the chart window

Steps to create, edit, and delete routes directly from the chart display.

3-10-2 Managing a route from the route window

How to create, insert, delete, and display routes using the dedicated route management window.

3-13 AIS

3-13-1 Viewing AIS Vessels

3-13-2 AIS Windows

3-14 DSC

3-14-1 Distress

Handling distress calls, navigating to distress positions, and managing distress logs.

3-14-2 Poll

4 Settings

4-1 System Configuration Settings

Configuring system-wide settings like language, chart selection, beep volume, and auto power.

4-2 Chart settings

Adjusting chart display parameters such as rotation, palette, display modes, and map datum.

4-3 Sonar settings

4-4 GPS Settings

4-5 Track & Log Settings

4-6 Memory Settings

4-7 AIS Settings

4-8 Alarm Settings

5 CONNECTIONS

5-2 CONNECTION

General guidance on connecting the chart plotter to various NMEA equipment and peripherals.

5-3 Power supply & DATA cable

Instructions for connecting the power supply and data cables, including fuse recommendations.

5-4 Alert equipment

5-5 GPS ANTENNA

Guidance on selecting and installing internal or external GPS antennas for optimal signal reception.

5-6 NMEA 0183

5-7 DATA

5-7-1 DGPS;NMEA ANTENNA

Connecting external GPS and setting DGPS options like WAAS/EGNOS for accurate positioning.

5-7-2 NMEA2000

Connecting to NMEA2000 equipment for marine data communication, including fuel, wind, and depth.

5-9 Set up and Test

Finalizing installation, adjusting screen view, inserting cards, and verifying GPS satellite status.

System Maintenance

Diagnosis

Samyung NF120 Specifications

General

Display Resolution	480 x 272 pixels
Power Output	600W
Water Temperature Sensor	Yes
GPS	No
Weight	1.2 kg
Display Size	4.3 inches
Frequency	200 kHz
Display	Color TFT LCD
Sonar Frequency	200 kHz
Battery	12V