Need help?Do you have a question about the Sana EUJ606 and is the answer not in the manual?
Lists all parts and accessories included with the Sana Juicer EUJ606, totaling 15 items.
Connect drum to main body by turning locking clip clockwise and place hopper onto guide.
Place auger and juicing strainer into drum, then attach drum cap and adjustable pressure cap.
Assemble by placing auger and processing strainer into drum, then attaching drum cap.
Place juice bowl and pulp bowl under drum set when juicing; plug power cord into outlet.
Press ON button, feed cut fruit/vegetables one at a time into guide using food pusher.
Use reverse button to clear clogging if machine stops; press ON to resume operation.
Switch off juicer before changing accessories. Remove drum set by turning locking clip counter-clockwise.
Do not run the juicer continuously for more than 30 minutes at any one time.
Replace juicing strainer with processing strainer and place desired nozzle into strainer end.
Sprinkle flour on holding dish, press ON button, and push pasta dough through food guide.
Use scissors to cut pasta to desired lengths and cook according to recipe.
Disassemble unit, rinse in cold water, then wash parts in warm soapy water in sink.
To Next Page
General
