Sandel SN3500 - Page 22

7-2 ENSTROM 480B RFM SUPPLEMENT
Rev. 1
Report No. 28-AC-049 Nov 12/14
3. As shown from Figure 7-1, the SN3500 is configured
to display data from the following sources:
a. Compass system (via the SG102 AHRS and MT102
MTA) and,
b. NAV receivers (via the VOR/LOC/GS)
4. The SN3500 layout consists of a three inch display,
eleven backlit pushbuttons, two knobs with push-to-
select, and one USB connector. The SN3500 controls
(noted in bold font) and display features are shown in
Figure 7-2 and Figure 7-3.
a. The display in Figure 7-2 shows that the SN3500 is
tuned to VOR signals whereas the display in Figure
7-3 shows the SN3500 is tuned to an ILS signal.
Figure 7-2. SN3500 Controls and Display Area (VOR)
NAV2
0.3m
210°
N
A
V
1
NAV1
15.9m
085°
NAV1
Navigation
Course
Pointer Knob
Clear Bearing Memory
USB Connector
Heading Bug
Knob
View: Full or Arc
Menu
Mag. Heading
Heading Bug
DME
Groundspeed
Course Pointer
Selected
Heading
To/From Indicator
DME Distance
Selected Course
Current NAV
Source
Bearing
Pointer 1
Bearing
Pointer 1 Source
and Heading
Bearing Pointer 2
Source and Heading
Bearing Pointer 2
Marker Beacon
Annunciator
(excludes P/N
4220609-1)
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
level of this Rotorcraft Flight Manual Supplement.
UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED