82050-PG-ERR-F1 SANDEL SA4550 PG ERRATA PAGE 1 OF 2
SA4550
Pilot’s Guide Effectivity and Errata
Insert this update ahead of the cover page of the above referenced Pilot’s
Guide.
Date:
Effectivity:
Errata:
06-NOV-2013
SA4550 Software Version 1.09
Pilots Guide 82050-PG-F
With the exception of the
superseding information contained
in this document, operation of the
SA4550 is as described in the
SA4550 Pilot’s Guide referenced
above.
82050-PG-ERR-F1 SANDEL SA4550 PG ERRATA PAGE 2 OF 2
1) Page 2-8: added description of Radar Altimeter test.
CONTROL FEATURE
FUNCTION OPERATION
Radar Altimeter Test:
Used to test radar
altimeter system. If a
radar altimeter system is
not installed or remote
test function is not
enabled, the message
“Function Not Installed”
will appear when [RA
TEST] is pressed.
Depress [RA TEST]
button and observe
radar altimeter display
for proper indications.
See AFM for proper
radar altimeter test
display indications. For
installations using a
digital 429 radar
altimeter, the text “RAD
ALT” in the radar
altimeter window of the
display will be replaced
with “RA TEST” in
amber while the system
is under test.
RADAR
ALTIMETER
TEST
To Next Page
Need help?
General
