EasyManua.ls Logo

Sandel SA4550 - Approvals and Limitations; Approvals; Limitations; Conventions Used in This Manual

Sandel SA4550
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
82010-PG, REV. F SANDEL SA4550 PILOT’S GUIDE
V
Approvals
The FAA has approved the SA4550 under the following TSOs:
C3d: Turn and Slip Instruments
C4c: Bank and Pitch Instruments
C34e: ILS Glideslope Receiving Equipment
C36e: Airborne ILS Localizer Receiving Equipment
C52b: Flight Director Equipment
C113: Airborne Multipurpose Electronic Displays
The following RTCA certification levels also apply to this product:
DO-160E: Environmental (Categories listed in Chapter 4)
DO-178B: Software Level A and C
DO-254: Hardware Level A and C
Limitations
Category I Approaches Only.
Installation of the SA4550 in a type-certificated aircraft must be
performed in accordance with the Sandel SA4550 Installation
Manual, document number 82010-IM (applicable revision).
82010-PG, REV. F SANDEL SA4550 PILOT’S GUIDE
VI
Conventions Used in This Manual
The name of a button or control is placed within square brackets
when the button is described in text. For example, “…press the [M]
selection button to …”
This manual uses terms, which should be familiar to aviation-
minded readers, such as “Attitude” and “Flight Director”. Terms,
which are specific to the SA4550, will be placed in the glossary.

Table of Contents

Related product manuals