Sanden GS3-45HPA-US - User Manual

Sanden GS3-45HPA-US

20 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

SandenHeatPump–Owner’sManual

Page1of20

Page title

Covering model numbers for residence

Heat Pump Unit GS3-45HPA-US

This appliance is not to be installed by unqualified and

unlicensed persons, please read and understand this manual

prior to installing and operating the unit.





Owner’s manual

Other manuals for Sanden GS3-45HPA-US

Installation Manual36 pages

Questions and Answers

E
egonzalezAug 1, 2025
What to do if my Sanden Water Heater has no hot water?
- N
  Nicholas HillAug 1, 2025
  If no hot water is coming from your Sanden Water Heater, several factors could be the cause. First, the temperature of the hot water might be too low; in this case, stop using hot water and wait about 1 hour. Another cause can be a blockage on the evaporator, so remove any object blocking the air flow. Also check if the stop valve is closed and open it. If the filter on the cold inlet connector is blocked, check the filter and remove any blockage. The issue could also stem from frozen pipes; if you find a frozen area, melt the ice and provide heat insulation. Additionally, inspect the heat pump piping for any bends or crushes and correct them.
R
ronaldperezAug 15, 2025
Why is my Sanden Water Heater not producing hot water?
- B
  Brian TaylorAug 16, 2025
  There are several reasons why your Sanden Water Heater might not be producing hot water. Insufficient air absorption due to a blockage on the evaporator could be the cause; clear any obstructions like leaves or snow. The water flow speed may be dropped due to the heat pump piping bend, blockage or crush, so check for any piping bend or crush and remove if any. Also, the air removing procedure from the heat pump system may be insufficient; open the water drain plugs on the Heat Pump Unit to remove air from the water circuit, being careful of burns.

Summary

Safety precautions

Warning Classifications

Explains the meaning of warning symbols used for serious safety instructions.

Caution Classifications

Explains the meaning of caution symbols used for general safety instructions.

Installation details

Trouble shooting guide

Troubleshooting Table

Provides a table of common issues, their causes, and recommended actions for the heat pump system.

Error Codes

Error Code List

Lists various error codes displayed by the unit and their corresponding potential issues.

Filling the System & Purging Air

Mains Power;Electrical Installation

Electrical connections

Covers the requirements and procedures for connecting the unit to the electrical supply.

How to connect Main Power

System operation using continuous power

System operation if connected to Demand Response power

GS3-45 HPA-US Dimensions

Warranty Policy

Warranty Conditions

Warranty Exclusions

Warranty period

Sanden GS3-45HPA-US Specifications

General

Brand	Sanden
Model	GS3-45HPA-US
Category	Heat Pump
Language	English

Related product manuals

Preview: Sanden GAU-A45HPA

Sanden GAU-A45HPA

Sanden GUS-A45HPA

Preview: Sanden EcoPlus GAUS-300FQS

Sanden EcoPlus GAUS-300FQS