Need help?Do you have a question about the Sanden GUS-A45HPA and is the answer not in the manual?
Explains the Sanden Heat Pump Water Heater System's operation using CO2.
Details on how electrical connections should be made by a licensed electrician.
Step-by-step guide for connecting the main power supply to the unit.
Instructions for setting the unit's clock and blackout times.
Covers drive, compulsory, and pump remote operation modes.
Includes error history, parameter display, and blackout time setting.
Details on chloride concentration and pH levels affecting warranty.
Discusses the impact of changing water supply sources on the system.
Outlines the conditions under which the warranty is valid.
Lists conditions that will void the warranty or incur extra costs.
Explains the Sanden Heat Pump Water Heater System's operation using CO2.
Details on how electrical connections should be made by a licensed electrician.
Step-by-step guide for connecting the main power supply to the unit.
Instructions for setting the unit's clock and blackout times.
Covers drive, compulsory, and pump remote operation modes.
Includes error history, parameter display, and blackout time setting.
Details on chloride concentration and pH levels affecting warranty.
Discusses the impact of changing water supply sources on the system.
Outlines the conditions under which the warranty is valid.
Lists conditions that will void the warranty or incur extra costs.
General| Model Number | GUS-A45HPA |
|---|---|
| Category | Heat Pump |
| Rated Capacity | 4.5 kW |
| Heating Capacity | 5.0 kW |
| Cooling Capacity | 4.5 kW |
| Refrigerant | R32 |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor Unit) | 52 dB |
To Next Page
