To Next Page
E
egonzalezAug 1, 2025
What to do if my Sanden Water Heater has no hot water?
- NNicholas HillAug 1, 2025
If no hot water is coming from your Sanden Water Heater, several factors could be the cause. First, the temperature of the hot water might be too low; in this case, stop using hot water and wait about 1 hour. Another cause can be a blockage on the evaporator, so remove any object blocking the air flow. Also check if the stop valve is closed and open it. If the filter on the cold inlet connector is blocked, check the filter and remove any blockage. The issue could also stem from frozen pipes; if you find a frozen area, melt the ice and provide heat insulation. Additionally, inspect the heat pump piping for any bends or crushes and correct them.
General
