V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230255
and receive change without first attempting a vend.
OFF - The consumer can insert a bill into the validator, press the coin return button and
immediately receive change.
Multi-Vend:
ON - The consumer may insert enough credit to make multiple vends. The credit will
remain on the display until an additional vend is made or the coin return button is
pressed.
OFF - The consumer is allowed to make a single vend and the credit (if applicable),
will be returned after the completion of the vend.
Deny Escrow
ON - The validator will stack all bills received.
OFF - The validator will not stack the bills, rather it will hold them in escrow until a
vend is complete.
SO Indicator
ON - A small symbol will appear in the lower right hand corner of the display when at
least one column is sold out or the machine detects an error.
OFF - The symbol will not appear.
Count by Selection/Price
COUNT BY SELECTION - Individual sales and cash data will be reported in unit sales.
COUNT BY PRICE - Individual sales and cash data will be reported by vend price.
MIS Reset W/DEX
ON - MIS data will be reset with a DEX read.
OFF - MIS data will not be reset with a DEX read.
Depth Learning
ON - The control board will “learn” the depth setting after one row of product in the
column is vended.
OFF - The control board will not “learn” the depth setting.
Display Scroll:
ON - The display will scroll the messages across the screen.
OFF – The Display will blink the message
Display Temperature:
ON – The refrigeration temperature will be displayed on the screen.
OFF – The temperature will not be displayed.
V21 12.4 Programming HV3 / CHAMELEON | P1-7
To Next Page
Loading...
