SandenVendo V21 621 - Page 80

V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230298
“tUE” – Tuesday
“
UUE” – Wednesday
“
Thu” – Thursday
“
Fri” – Friday
“
SAt” – Saturday
“
Sun” – Sunday
“
ALL” – All Days
bLC1 Block Selection Setting
This feature is used to choose a group of selections and the time when those selections will be
blocked from vending product. If selection button two is pressed at the “
bLC1” or “bLC2”
prompt, the controller will enter the Selection Blocking Control Mode. Upon entry into this
program, the display will show the first sub-mode “
CtL1” or “CtL2” depending on which
blocking mode you are using. Using selection button one will let the operator toggle between
the following modes:
SET-UP AND CODE DESCRIPTION (CONTINUED)
BLOCK SELECTION OPTIONS
CtL1
Controls blocking option
SbL1
Set selection buttons – (y) assigned/(n) not assigned
Str1
Set time for machine to turn off
dAY
Set days for blocking to start
hour
Set hours for blocking to start
StP1
Set time for machine to turn back on
dAY
Set days for blocking to stop
hour
Set hours for blocking to stop
diSC Discount Setting Mode
This feature is used to choose a group of selections that will be discounted, the amount of
discount, and the time when the discount will occur. If selection button two is pressed at the
“
diSC” prompt, the controller will enter the Discount Setting Mode. Upon entry into this
program the display will show “
CtL1”. If selection button one is pressed it will toggle through
V21
12.1 Programming Trade | P3-14