http://kb.sandisk.com/
Enjoying Music
Attach correct size earbud cups to earphones and connect to player.
Press center button to turn on player.
Press left or right buttons to scroll through options and select Music from the Main Menu by pressing the center button.
Press top or bottom buttons to browse music options and press center button to select desired choice.
(If needed, repeat step until songs are displayed.)
Press top or bottom buttons to browse songs and press center button to play desired choice
Press left or right buttons to skip a song
Press top button to pause or restart a song.
Press the Back button to return to the previous menu level.
Using a Memory Card
An optional microSD™ or microSDHC™ card* provides extra storage space.
Simply insert the card in the memory card slot on the side of the player.
Note: Your card content will show up under the CARD menu.
Tips and Troubleshooting
For best performance, download the latest firmware from:
http://kb.sandisk.com/clipsport
2. Press and hold on/off button for 10 seconds to reset the device to unlock it from any temporary condition such as freezing or
failing to connect to the
3. If the device fails to turn on, perform a reset (see step 2) and connect to the Check the battery level and recharge if needed.
4. If the device fails to be detected by the computer, verify that your computer meets the minimum system
5. For support information or to learn more about player functions, visit:
http://kb.sandisk.com/clipsport
STOP!
IMPORTANT INFORMATION YOU MUST READ THIS BEFORE USING THE MP3 PLAYER
Safety Instructions
To Next Page
Loading...
